Could the E-bike drivetrain wear down till needing replacement after 400 km?What would be the “definitive” formula to calculate chainstay length from sprocket size, chainring size and number of chain links?Chain falling off inner chain ring no matter how L screw is setReplaced chain, bike makes grinding noise?Can't shift front gear, despite loosening, tightening, etc. What could be wrong?Chain falls to the outside of the chainring, but I can't reproduce the problemtiming chain keeps dropping/derailing only with partnernew 9-speed chain fails after 4 weeks and ~240 milesModded folding bike and strange chain skipping on most gearsCost effective drivetrain maintananceTools for 2011 Santa Cruz Heckler tuneup
What does the behaviour of water on the skin of an aircraft in flight tell us?
Explain Ant-Man's "not it" scene from Avengers: Endgame
Creating Fictional Slavic Place Names
Pros and cons of writing a book review?
Is it possible to kill all life on Earth?
Can an old DSLR be upgraded to match modern smartphone image quality
How can a single Member of the House block a Congressional bill?
Orientable with respect to complex cobordism?
What is a natural deduction proof from ~(A↔B) to ~(A→B)?
How do I get a list of only the files (not the directories) from a package?
How can I offer a test ride while selling a bike?
Asking for something with different prices
Strange math syntax in old basic listing
What is the most important characteristic of New Weird as a genre?
What if you don't bring your credit card or debit for incidentals?
How to write a vulnerable moment without it seeming cliche or mushy?
Have powerful mythological heroes ever run away or been deeply afraid?
Is American Express widely accepted in France?
Are grass strips more dangerous than tarmac?
Why were the Night's Watch required to be celibate?
Can The Malloreon be read without first reading The Belgariad?
Future enhancements for the finite element method
Can a helicopter mask itself from Radar?
How do I truncate a csv file?
Could the E-bike drivetrain wear down till needing replacement after 400 km?
What would be the “definitive” formula to calculate chainstay length from sprocket size, chainring size and number of chain links?Chain falling off inner chain ring no matter how L screw is setReplaced chain, bike makes grinding noise?Can't shift front gear, despite loosening, tightening, etc. What could be wrong?Chain falls to the outside of the chainring, but I can't reproduce the problemtiming chain keeps dropping/derailing only with partnernew 9-speed chain fails after 4 weeks and ~240 milesModded folding bike and strange chain skipping on most gearsCost effective drivetrain maintananceTools for 2011 Santa Cruz Heckler tuneup
The drivetrain (chain? gears?) of my E-bike started to make loud clicking sounds, with the impression that the chain is skipping over teeth. The gear switching itself still works well.
I have tried to regulate the rear gear mechanism by adjusting the position screws but failed to make any improvement. The chain seems positioned properly.
I started to think, maybe some parts would require replacement. Could this possibly be for the bike that has been traveled only 400 km so far? It was rather cheap for E-bike from the other side, and on flat terrain it was mostly used on the same (fastest) gear.
Could some parts be already worn if low end? If so, which parts are likely to be?
maintenance chain electric-bike skipping
asked Mar 23 at 19:59
h22h22
31519
|
show 1 more comment
The drivetrain (chain? gears?) of my E-bike started to make loud clicking sounds, with the impression that the chain is skipping over teeth. The gear switching itself still works well.
I have tried to regulate the rear gear mechanism by adjusting the position screws but failed to make any improvement. The chain seems positioned properly.
I started to think, maybe some parts would require replacement. Could this possibly be for the bike that has been traveled only 400 km so far? It was rather cheap for E-bike from the other side, and on flat terrain it was mostly used on the same (fastest) gear.
Could some parts be already worn if low end? If so, which parts are likely to be?
maintenance chain electric-bike skipping
asked Mar 23 at 19:59
h22h22
31519
4
At the end of the day, the answer to "My new bike doesn't work properly" is to take it back to the shop and get them to fix it. A good bike shop should also be offering a free service after, say a month, to make sure everything's adjusted properly. Of course, it's always educational to find out how you'd diagnose and fix it yourself.
– David Richerby
Mar 23 at 20:31
2
An E-Bike should definitely last more than 400km, unless it is a cheap plastic toy for indoor use by children After all, it's a motorcycle, just not with a internal combustion engine but an electric one. This is in contrast to a Pedelec ("Pedal Electric Cycle") where the user is intended to propel the bike with the pedals, with some assistance from an electric motor. A Pedelect is built quite similar to a regular bike - and therefore shares the same weak points. Specifically, the bearings. A failong bottom bracket (to which the crankset ("the pedals") is connected) emits loud clicking noises.
– Klaws
Mar 24 at 15:30
@Klaws Most things that people call "e-bikes" are what you call a "pedelec". But what difference does it make? Any e-bike, pedelec or ordinary bicycle should last more than 400km.
– David Richerby
Mar 25 at 22:08
@David The difference is that a "true e-bike" (like, for example, the Super SOCO TS1200R, motor power 2.4kW) has no "human factor" in the drivetrain. It will not deliver any more drive prower into the mechanical drive parts than it's rated for. A pedelec is different, it has pedals. And it's probably meant for the more lazy riders, who can add maybe 0.1kW of power to the motor power of maybe 0.25kW. A "trained amateur" can easily deliver a longterm 0.2kW (much more shortterm), and a pro can exceed 2kW. An enthusiastic biker can put much more stress on the drivetrain than it was designed for.
– Klaws
Apr 1 at 12:16
@Klaws I'm aware of the differences. My question "What difference does it make?" was specifically about the "My bike broke after 400km" aspect of the question. Whatever type of electric two-wheeled vehicle it is, it should be lasting much longer than that.
– David Richerby
Apr 1 at 12:24
|
show 1 more comment
The drivetrain (chain? gears?) of my E-bike started to make loud clicking sounds, with the impression that the chain is skipping over teeth. The gear switching itself still works well.
I have tried to regulate the rear gear mechanism by adjusting the position screws but failed to make any improvement. The chain seems positioned properly.
I started to think, maybe some parts would require replacement. Could this possibly be for the bike that has been traveled only 400 km so far? It was rather cheap for E-bike from the other side, and on flat terrain it was mostly used on the same (fastest) gear.
Could some parts be already worn if low end? If so, which parts are likely to be?
maintenance chain electric-bike skipping
asked Mar 23 at 19:59
h22h22
31519
The drivetrain (chain? gears?) of my E-bike started to make loud clicking sounds, with the impression that the chain is skipping over teeth. The gear switching itself still works well.
I have tried to regulate the rear gear mechanism by adjusting the position screws but failed to make any improvement. The chain seems positioned properly.
I started to think, maybe some parts would require replacement. Could this possibly be for the bike that has been traveled only 400 km so far? It was rather cheap for E-bike from the other side, and on flat terrain it was mostly used on the same (fastest) gear.
Could some parts be already worn if low end? If so, which parts are likely to be?
maintenance chain electric-bike skipping
maintenance chain electric-bike skipping
asked Mar 23 at 19:59
h22h22
31519
asked Mar 23 at 19:59
h22h22
31519
asked Mar 23 at 19:59
h22h22
31519
asked Mar 23 at 19:59
h22h22
31519
asked Mar 23 at 19:59
h22h22
31519
31519
4
At the end of the day, the answer to "My new bike doesn't work properly" is to take it back to the shop and get them to fix it. A good bike shop should also be offering a free service after, say a month, to make sure everything's adjusted properly. Of course, it's always educational to find out how you'd diagnose and fix it yourself.
– David Richerby
Mar 23 at 20:31
2
An E-Bike should definitely last more than 400km, unless it is a cheap plastic toy for indoor use by children After all, it's a motorcycle, just not with a internal combustion engine but an electric one. This is in contrast to a Pedelec ("Pedal Electric Cycle") where the user is intended to propel the bike with the pedals, with some assistance from an electric motor. A Pedelect is built quite similar to a regular bike - and therefore shares the same weak points. Specifically, the bearings. A failong bottom bracket (to which the crankset ("the pedals") is connected) emits loud clicking noises.
– Klaws
Mar 24 at 15:30
@Klaws Most things that people call "e-bikes" are what you call a "pedelec". But what difference does it make? Any e-bike, pedelec or ordinary bicycle should last more than 400km.
– David Richerby
Mar 25 at 22:08
@David The difference is that a "true e-bike" (like, for example, the Super SOCO TS1200R, motor power 2.4kW) has no "human factor" in the drivetrain. It will not deliver any more drive prower into the mechanical drive parts than it's rated for. A pedelec is different, it has pedals. And it's probably meant for the more lazy riders, who can add maybe 0.1kW of power to the motor power of maybe 0.25kW. A "trained amateur" can easily deliver a longterm 0.2kW (much more shortterm), and a pro can exceed 2kW. An enthusiastic biker can put much more stress on the drivetrain than it was designed for.
– Klaws
Apr 1 at 12:16
@Klaws I'm aware of the differences. My question "What difference does it make?" was specifically about the "My bike broke after 400km" aspect of the question. Whatever type of electric two-wheeled vehicle it is, it should be lasting much longer than that.
– David Richerby
Apr 1 at 12:24
|
show 1 more comment
4
At the end of the day, the answer to "My new bike doesn't work properly" is to take it back to the shop and get them to fix it. A good bike shop should also be offering a free service after, say a month, to make sure everything's adjusted properly. Of course, it's always educational to find out how you'd diagnose and fix it yourself.
– David Richerby
Mar 23 at 20:31
2
An E-Bike should definitely last more than 400km, unless it is a cheap plastic toy for indoor use by children After all, it's a motorcycle, just not with a internal combustion engine but an electric one. This is in contrast to a Pedelec ("Pedal Electric Cycle") where the user is intended to propel the bike with the pedals, with some assistance from an electric motor. A Pedelect is built quite similar to a regular bike - and therefore shares the same weak points. Specifically, the bearings. A failong bottom bracket (to which the crankset ("the pedals") is connected) emits loud clicking noises.
– Klaws
Mar 24 at 15:30
@Klaws Most things that people call "e-bikes" are what you call a "pedelec". But what difference does it make? Any e-bike, pedelec or ordinary bicycle should last more than 400km.
– David Richerby
Mar 25 at 22:08
@David The difference is that a "true e-bike" (like, for example, the Super SOCO TS1200R, motor power 2.4kW) has no "human factor" in the drivetrain. It will not deliver any more drive prower into the mechanical drive parts than it's rated for. A pedelec is different, it has pedals. And it's probably meant for the more lazy riders, who can add maybe 0.1kW of power to the motor power of maybe 0.25kW. A "trained amateur" can easily deliver a longterm 0.2kW (much more shortterm), and a pro can exceed 2kW. An enthusiastic biker can put much more stress on the drivetrain than it was designed for.
– Klaws
Apr 1 at 12:16
@Klaws I'm aware of the differences. My question "What difference does it make?" was specifically about the "My bike broke after 400km" aspect of the question. Whatever type of electric two-wheeled vehicle it is, it should be lasting much longer than that.
– David Richerby
Apr 1 at 12:24
4
4
At the end of the day, the answer to "My new bike doesn't work properly" is to take it back to the shop and get them to fix it. A good bike shop should also be offering a free service after, say a month, to make sure everything's adjusted properly. Of course, it's always educational to find out how you'd diagnose and fix it yourself.
– David Richerby
Mar 23 at 20:31
At the end of the day, the answer to "My new bike doesn't work properly" is to take it back to the shop and get them to fix it. A good bike shop should also be offering a free service after, say a month, to make sure everything's adjusted properly. Of course, it's always educational to find out how you'd diagnose and fix it yourself.
– David Richerby
Mar 23 at 20:31
2
2
An E-Bike should definitely last more than 400km, unless it is a cheap plastic toy for indoor use by children After all, it's a motorcycle, just not with a internal combustion engine but an electric one. This is in contrast to a Pedelec ("Pedal Electric Cycle") where the user is intended to propel the bike with the pedals, with some assistance from an electric motor. A Pedelect is built quite similar to a regular bike - and therefore shares the same weak points. Specifically, the bearings. A failong bottom bracket (to which the crankset ("the pedals") is connected) emits loud clicking noises.
– Klaws
Mar 24 at 15:30
An E-Bike should definitely last more than 400km, unless it is a cheap plastic toy for indoor use by children After all, it's a motorcycle, just not with a internal combustion engine but an electric one. This is in contrast to a Pedelec ("Pedal Electric Cycle") where the user is intended to propel the bike with the pedals, with some assistance from an electric motor. A Pedelect is built quite similar to a regular bike - and therefore shares the same weak points. Specifically, the bearings. A failong bottom bracket (to which the crankset ("the pedals") is connected) emits loud clicking noises.
– Klaws
Mar 24 at 15:30
@Klaws Most things that people call "e-bikes" are what you call a "pedelec". But what difference does it make? Any e-bike, pedelec or ordinary bicycle should last more than 400km.
– David Richerby
Mar 25 at 22:08
@Klaws Most things that people call "e-bikes" are what you call a "pedelec". But what difference does it make? Any e-bike, pedelec or ordinary bicycle should last more than 400km.
– David Richerby
Mar 25 at 22:08
@David The difference is that a "true e-bike" (like, for example, the Super SOCO TS1200R, motor power 2.4kW) has no "human factor" in the drivetrain. It will not deliver any more drive prower into the mechanical drive parts than it's rated for. A pedelec is different, it has pedals. And it's probably meant for the more lazy riders, who can add maybe 0.1kW of power to the motor power of maybe 0.25kW. A "trained amateur" can easily deliver a longterm 0.2kW (much more shortterm), and a pro can exceed 2kW. An enthusiastic biker can put much more stress on the drivetrain than it was designed for.
– Klaws
Apr 1 at 12:16
@David The difference is that a "true e-bike" (like, for example, the Super SOCO TS1200R, motor power 2.4kW) has no "human factor" in the drivetrain. It will not deliver any more drive prower into the mechanical drive parts than it's rated for. A pedelec is different, it has pedals. And it's probably meant for the more lazy riders, who can add maybe 0.1kW of power to the motor power of maybe 0.25kW. A "trained amateur" can easily deliver a longterm 0.2kW (much more shortterm), and a pro can exceed 2kW. An enthusiastic biker can put much more stress on the drivetrain than it was designed for.
– Klaws
Apr 1 at 12:16
@Klaws I'm aware of the differences. My question "What difference does it make?" was specifically about the "My bike broke after 400km" aspect of the question. Whatever type of electric two-wheeled vehicle it is, it should be lasting much longer than that.
– David Richerby
Apr 1 at 12:24
@Klaws I'm aware of the differences. My question "What difference does it make?" was specifically about the "My bike broke after 400km" aspect of the question. Whatever type of electric two-wheeled vehicle it is, it should be lasting much longer than that.
– David Richerby
Apr 1 at 12:24
|
show 1 more comment
5 Answers
5
active
oldest
votes
Yes it can and I've seen it before, but the problems you describe sound like issues which could be fixed with a simple gear tune rather than being caused by worn-out components.
The only one that I've seen wearing out that quickly could largely be blamed on the riding style of its owner. He was a heavy rider and reasonably strong, so he was someone who would put more stress on any drivetrain. He also had a tendency to ride with the motor on full assist at all times to allow him to get over any hills without having to shift out of the 11 tooth cog at the rear. The load that he was putting through the drivetrain combined with the tiny cog taking all of the stress meant that components wore out very very quickly.
He came in for new chains and cassettes (couldn't just buy a new 11 tooth unfortunately) a few times before I found a cheaper, more permanent solution for him. We replaced the chainring with a much bigger one and put on a cassette with a 13 tooth as the smallest cog.
answered Mar 24 at 6:20
Carbon side upCarbon side up
3,562320
add a comment |
I have tried to regulate the rear gear mechanism by adjusting the position screws but failed to make any improvement.
That's almost never the adjustment that the rear derailleur needs. Those screws are called the limit screws, and they set how far in and out the derailleur can move. All they do is stop the derailleur from moving the chain all the way off the cassette on either side. There's basically nothing that causes those screws to move on their own so, assuming they were set correctly when the bike was built, they should almost never need to be touched. The symptoms that do mean they need adjustment is that either the chain is falling off the top or bottom of the cassette (derailleur able to move too far) or that gear changing is just fine, except that you can't change into the smallest or biggest cog (derailleur not able to move far enough).
The correct adjustment is to use the barrel adjuster to get the correct cable tension. That very often is needed on new bikes, because the cables tend to stretch a bit after they're installed. Argenti Apparatus has already posted a video so I'll not go into more detail than that.
answered Mar 23 at 20:31
David RicherbyDavid Richerby
14.5k33971
1
What he said. New bike need readjustment on a regular basis. Even high end race bike need it. It certainly shouldn't be replaced after only 400km
– ker2x
Mar 23 at 23:00
add a comment |
Even for a low end eBike using 400km will not wear out drivetrain parts.
If the chain was slipping over the sprockets, you would feel the cranks and pedals slipping forwards. This tends to be sporadic and makes a loud clang or crunch.
If you are hearing a periodic ticking, It's likely the rear derailleur indexing needs adjustment. From your post it sounds like you adjusted the limit screws rather then the indexing barrel adjuster.
Try following a derailleur adjustment procedure and see if that fixes the problem.
answered Mar 23 at 20:08
Argenti ApparatusArgenti Apparatus
40.7k343101
2
I have worn out a singlespeed chain in 800 km so I wouldn't completely rule it out.
– ojs
Mar 23 at 22:19
add a comment |
I finally brought the bike to technician who discovered that the gear switching cable does not move freely enough (gets stuck). This is why I was not able find the good positions for any screws I attempted to adjust. Regardless of my desperation, the components of the gear itself were not worn, hence I leave the accepted answer as correct.
As for now, when I discover the gear mechanism going crazy again, I simply shift the gear from highest to lowest few times, "exercising" the cable. So far this always helps. Maybe the problem will go away by itself.
It is also true that I almost never use any other gear apart the fastest one, because of the flat terrain, so the cable does not see much usage.
answered Mar 31 at 7:56
h22h22
31519
Hmm. If the cable is sticking on a brand new bike, it is defective and should be replaced, free of charge. Either the cable is corroded (unlikely on a new bike) or the outers weren't rounded after being cut and they're pinching the inner. (The outers are cut with a cable cutter, which flattens then to an oval profile; you're supposed to poke something round into the cut end to fix that.)
– David Richerby
Mar 31 at 8:50
add a comment |
Take the chain off and thread it through the rear derailleur properly.
It happened to me - there is a small guard near the top cog and the bottom of the rearderailleur, I threaded my chain on the outside of it (easilly done) chain slipped as described.
edited Mar 25 at 22:50
Criggie♦
46.4k578160
answered Mar 25 at 21:51
CreeshaCreesha
1
1
What makes you think this is the problem? If there was a problem with the way the chain has been put through the derailleur, the problem would have existed from day one, not started later.
– David Richerby
Mar 25 at 22:10
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "126"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f59928%2fcould-the-e-bike-drivetrain-wear-down-till-needing-replacement-after-400-km%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
5 Answers
5
active
oldest
votes
5 Answers
5
active
oldest
votes
active
oldest
votes
active
oldest
votes
Yes it can and I've seen it before, but the problems you describe sound like issues which could be fixed with a simple gear tune rather than being caused by worn-out components.
The only one that I've seen wearing out that quickly could largely be blamed on the riding style of its owner. He was a heavy rider and reasonably strong, so he was someone who would put more stress on any drivetrain. He also had a tendency to ride with the motor on full assist at all times to allow him to get over any hills without having to shift out of the 11 tooth cog at the rear. The load that he was putting through the drivetrain combined with the tiny cog taking all of the stress meant that components wore out very very quickly.
He came in for new chains and cassettes (couldn't just buy a new 11 tooth unfortunately) a few times before I found a cheaper, more permanent solution for him. We replaced the chainring with a much bigger one and put on a cassette with a 13 tooth as the smallest cog.
answered Mar 24 at 6:20
Carbon side upCarbon side up
3,562320
add a comment |
Yes it can and I've seen it before, but the problems you describe sound like issues which could be fixed with a simple gear tune rather than being caused by worn-out components.
The only one that I've seen wearing out that quickly could largely be blamed on the riding style of its owner. He was a heavy rider and reasonably strong, so he was someone who would put more stress on any drivetrain. He also had a tendency to ride with the motor on full assist at all times to allow him to get over any hills without having to shift out of the 11 tooth cog at the rear. The load that he was putting through the drivetrain combined with the tiny cog taking all of the stress meant that components wore out very very quickly.
He came in for new chains and cassettes (couldn't just buy a new 11 tooth unfortunately) a few times before I found a cheaper, more permanent solution for him. We replaced the chainring with a much bigger one and put on a cassette with a 13 tooth as the smallest cog.
answered Mar 24 at 6:20
Carbon side upCarbon side up
3,562320
add a comment |
Yes it can and I've seen it before, but the problems you describe sound like issues which could be fixed with a simple gear tune rather than being caused by worn-out components.
The only one that I've seen wearing out that quickly could largely be blamed on the riding style of its owner. He was a heavy rider and reasonably strong, so he was someone who would put more stress on any drivetrain. He also had a tendency to ride with the motor on full assist at all times to allow him to get over any hills without having to shift out of the 11 tooth cog at the rear. The load that he was putting through the drivetrain combined with the tiny cog taking all of the stress meant that components wore out very very quickly.
He came in for new chains and cassettes (couldn't just buy a new 11 tooth unfortunately) a few times before I found a cheaper, more permanent solution for him. We replaced the chainring with a much bigger one and put on a cassette with a 13 tooth as the smallest cog.
answered Mar 24 at 6:20
Carbon side upCarbon side up
3,562320
Yes it can and I've seen it before, but the problems you describe sound like issues which could be fixed with a simple gear tune rather than being caused by worn-out components.
The only one that I've seen wearing out that quickly could largely be blamed on the riding style of its owner. He was a heavy rider and reasonably strong, so he was someone who would put more stress on any drivetrain. He also had a tendency to ride with the motor on full assist at all times to allow him to get over any hills without having to shift out of the 11 tooth cog at the rear. The load that he was putting through the drivetrain combined with the tiny cog taking all of the stress meant that components wore out very very quickly.
He came in for new chains and cassettes (couldn't just buy a new 11 tooth unfortunately) a few times before I found a cheaper, more permanent solution for him. We replaced the chainring with a much bigger one and put on a cassette with a 13 tooth as the smallest cog.
answered Mar 24 at 6:20
Carbon side upCarbon side up
3,562320
answered Mar 24 at 6:20
Carbon side upCarbon side up
3,562320
answered Mar 24 at 6:20
Carbon side upCarbon side up
3,562320
answered Mar 24 at 6:20
Carbon side upCarbon side up
3,562320
3,562320
add a comment |
add a comment |
I have tried to regulate the rear gear mechanism by adjusting the position screws but failed to make any improvement.
That's almost never the adjustment that the rear derailleur needs. Those screws are called the limit screws, and they set how far in and out the derailleur can move. All they do is stop the derailleur from moving the chain all the way off the cassette on either side. There's basically nothing that causes those screws to move on their own so, assuming they were set correctly when the bike was built, they should almost never need to be touched. The symptoms that do mean they need adjustment is that either the chain is falling off the top or bottom of the cassette (derailleur able to move too far) or that gear changing is just fine, except that you can't change into the smallest or biggest cog (derailleur not able to move far enough).
The correct adjustment is to use the barrel adjuster to get the correct cable tension. That very often is needed on new bikes, because the cables tend to stretch a bit after they're installed. Argenti Apparatus has already posted a video so I'll not go into more detail than that.
answered Mar 23 at 20:31
David RicherbyDavid Richerby
14.5k33971
1
What he said. New bike need readjustment on a regular basis. Even high end race bike need it. It certainly shouldn't be replaced after only 400km
– ker2x
Mar 23 at 23:00
add a comment |
I have tried to regulate the rear gear mechanism by adjusting the position screws but failed to make any improvement.
That's almost never the adjustment that the rear derailleur needs. Those screws are called the limit screws, and they set how far in and out the derailleur can move. All they do is stop the derailleur from moving the chain all the way off the cassette on either side. There's basically nothing that causes those screws to move on their own so, assuming they were set correctly when the bike was built, they should almost never need to be touched. The symptoms that do mean they need adjustment is that either the chain is falling off the top or bottom of the cassette (derailleur able to move too far) or that gear changing is just fine, except that you can't change into the smallest or biggest cog (derailleur not able to move far enough).
The correct adjustment is to use the barrel adjuster to get the correct cable tension. That very often is needed on new bikes, because the cables tend to stretch a bit after they're installed. Argenti Apparatus has already posted a video so I'll not go into more detail than that.
answered Mar 23 at 20:31
David RicherbyDavid Richerby
14.5k33971
1
What he said. New bike need readjustment on a regular basis. Even high end race bike need it. It certainly shouldn't be replaced after only 400km
– ker2x
Mar 23 at 23:00
add a comment |
I have tried to regulate the rear gear mechanism by adjusting the position screws but failed to make any improvement.
That's almost never the adjustment that the rear derailleur needs. Those screws are called the limit screws, and they set how far in and out the derailleur can move. All they do is stop the derailleur from moving the chain all the way off the cassette on either side. There's basically nothing that causes those screws to move on their own so, assuming they were set correctly when the bike was built, they should almost never need to be touched. The symptoms that do mean they need adjustment is that either the chain is falling off the top or bottom of the cassette (derailleur able to move too far) or that gear changing is just fine, except that you can't change into the smallest or biggest cog (derailleur not able to move far enough).
The correct adjustment is to use the barrel adjuster to get the correct cable tension. That very often is needed on new bikes, because the cables tend to stretch a bit after they're installed. Argenti Apparatus has already posted a video so I'll not go into more detail than that.
answered Mar 23 at 20:31
David RicherbyDavid Richerby
14.5k33971
I have tried to regulate the rear gear mechanism by adjusting the position screws but failed to make any improvement.
That's almost never the adjustment that the rear derailleur needs. Those screws are called the limit screws, and they set how far in and out the derailleur can move. All they do is stop the derailleur from moving the chain all the way off the cassette on either side. There's basically nothing that causes those screws to move on their own so, assuming they were set correctly when the bike was built, they should almost never need to be touched. The symptoms that do mean they need adjustment is that either the chain is falling off the top or bottom of the cassette (derailleur able to move too far) or that gear changing is just fine, except that you can't change into the smallest or biggest cog (derailleur not able to move far enough).
The correct adjustment is to use the barrel adjuster to get the correct cable tension. That very often is needed on new bikes, because the cables tend to stretch a bit after they're installed. Argenti Apparatus has already posted a video so I'll not go into more detail than that.
answered Mar 23 at 20:31
David RicherbyDavid Richerby
14.5k33971
answered Mar 23 at 20:31
David RicherbyDavid Richerby
14.5k33971
answered Mar 23 at 20:31
David RicherbyDavid Richerby
14.5k33971
answered Mar 23 at 20:31
David RicherbyDavid Richerby
14.5k33971
14.5k33971
1
What he said. New bike need readjustment on a regular basis. Even high end race bike need it. It certainly shouldn't be replaced after only 400km
– ker2x
Mar 23 at 23:00
add a comment |
1
What he said. New bike need readjustment on a regular basis. Even high end race bike need it. It certainly shouldn't be replaced after only 400km
– ker2x
Mar 23 at 23:00
1
1
What he said. New bike need readjustment on a regular basis. Even high end race bike need it. It certainly shouldn't be replaced after only 400km
– ker2x
Mar 23 at 23:00
What he said. New bike need readjustment on a regular basis. Even high end race bike need it. It certainly shouldn't be replaced after only 400km
– ker2x
Mar 23 at 23:00
add a comment |
Even for a low end eBike using 400km will not wear out drivetrain parts.
If the chain was slipping over the sprockets, you would feel the cranks and pedals slipping forwards. This tends to be sporadic and makes a loud clang or crunch.
If you are hearing a periodic ticking, It's likely the rear derailleur indexing needs adjustment. From your post it sounds like you adjusted the limit screws rather then the indexing barrel adjuster.
Try following a derailleur adjustment procedure and see if that fixes the problem.
answered Mar 23 at 20:08
Argenti ApparatusArgenti Apparatus
40.7k343101
2
I have worn out a singlespeed chain in 800 km so I wouldn't completely rule it out.
– ojs
Mar 23 at 22:19
add a comment |
Even for a low end eBike using 400km will not wear out drivetrain parts.
If the chain was slipping over the sprockets, you would feel the cranks and pedals slipping forwards. This tends to be sporadic and makes a loud clang or crunch.
If you are hearing a periodic ticking, It's likely the rear derailleur indexing needs adjustment. From your post it sounds like you adjusted the limit screws rather then the indexing barrel adjuster.
Try following a derailleur adjustment procedure and see if that fixes the problem.
answered Mar 23 at 20:08
Argenti ApparatusArgenti Apparatus
40.7k343101
2
I have worn out a singlespeed chain in 800 km so I wouldn't completely rule it out.
– ojs
Mar 23 at 22:19
add a comment |
Even for a low end eBike using 400km will not wear out drivetrain parts.
If the chain was slipping over the sprockets, you would feel the cranks and pedals slipping forwards. This tends to be sporadic and makes a loud clang or crunch.
If you are hearing a periodic ticking, It's likely the rear derailleur indexing needs adjustment. From your post it sounds like you adjusted the limit screws rather then the indexing barrel adjuster.
Try following a derailleur adjustment procedure and see if that fixes the problem.
answered Mar 23 at 20:08
Argenti ApparatusArgenti Apparatus
40.7k343101
Even for a low end eBike using 400km will not wear out drivetrain parts.
If the chain was slipping over the sprockets, you would feel the cranks and pedals slipping forwards. This tends to be sporadic and makes a loud clang or crunch.
If you are hearing a periodic ticking, It's likely the rear derailleur indexing needs adjustment. From your post it sounds like you adjusted the limit screws rather then the indexing barrel adjuster.
Try following a derailleur adjustment procedure and see if that fixes the problem.
answered Mar 23 at 20:08
Argenti ApparatusArgenti Apparatus
40.7k343101
answered Mar 23 at 20:08
Argenti ApparatusArgenti Apparatus
40.7k343101
answered Mar 23 at 20:08
Argenti ApparatusArgenti Apparatus
40.7k343101
answered Mar 23 at 20:08
Argenti ApparatusArgenti Apparatus
40.7k343101
40.7k343101
2
I have worn out a singlespeed chain in 800 km so I wouldn't completely rule it out.
– ojs
Mar 23 at 22:19
add a comment |
2
I have worn out a singlespeed chain in 800 km so I wouldn't completely rule it out.
– ojs
Mar 23 at 22:19
2
2
I have worn out a singlespeed chain in 800 km so I wouldn't completely rule it out.
– ojs
Mar 23 at 22:19
I have worn out a singlespeed chain in 800 km so I wouldn't completely rule it out.
– ojs
Mar 23 at 22:19
add a comment |
I finally brought the bike to technician who discovered that the gear switching cable does not move freely enough (gets stuck). This is why I was not able find the good positions for any screws I attempted to adjust. Regardless of my desperation, the components of the gear itself were not worn, hence I leave the accepted answer as correct.
As for now, when I discover the gear mechanism going crazy again, I simply shift the gear from highest to lowest few times, "exercising" the cable. So far this always helps. Maybe the problem will go away by itself.
It is also true that I almost never use any other gear apart the fastest one, because of the flat terrain, so the cable does not see much usage.
answered Mar 31 at 7:56
h22h22
31519
Hmm. If the cable is sticking on a brand new bike, it is defective and should be replaced, free of charge. Either the cable is corroded (unlikely on a new bike) or the outers weren't rounded after being cut and they're pinching the inner. (The outers are cut with a cable cutter, which flattens then to an oval profile; you're supposed to poke something round into the cut end to fix that.)
– David Richerby
Mar 31 at 8:50
add a comment |
I finally brought the bike to technician who discovered that the gear switching cable does not move freely enough (gets stuck). This is why I was not able find the good positions for any screws I attempted to adjust. Regardless of my desperation, the components of the gear itself were not worn, hence I leave the accepted answer as correct.
As for now, when I discover the gear mechanism going crazy again, I simply shift the gear from highest to lowest few times, "exercising" the cable. So far this always helps. Maybe the problem will go away by itself.
It is also true that I almost never use any other gear apart the fastest one, because of the flat terrain, so the cable does not see much usage.
answered Mar 31 at 7:56
h22h22
31519
Hmm. If the cable is sticking on a brand new bike, it is defective and should be replaced, free of charge. Either the cable is corroded (unlikely on a new bike) or the outers weren't rounded after being cut and they're pinching the inner. (The outers are cut with a cable cutter, which flattens then to an oval profile; you're supposed to poke something round into the cut end to fix that.)
– David Richerby
Mar 31 at 8:50
add a comment |
I finally brought the bike to technician who discovered that the gear switching cable does not move freely enough (gets stuck). This is why I was not able find the good positions for any screws I attempted to adjust. Regardless of my desperation, the components of the gear itself were not worn, hence I leave the accepted answer as correct.
As for now, when I discover the gear mechanism going crazy again, I simply shift the gear from highest to lowest few times, "exercising" the cable. So far this always helps. Maybe the problem will go away by itself.
It is also true that I almost never use any other gear apart the fastest one, because of the flat terrain, so the cable does not see much usage.
answered Mar 31 at 7:56
h22h22
31519
I finally brought the bike to technician who discovered that the gear switching cable does not move freely enough (gets stuck). This is why I was not able find the good positions for any screws I attempted to adjust. Regardless of my desperation, the components of the gear itself were not worn, hence I leave the accepted answer as correct.
As for now, when I discover the gear mechanism going crazy again, I simply shift the gear from highest to lowest few times, "exercising" the cable. So far this always helps. Maybe the problem will go away by itself.
It is also true that I almost never use any other gear apart the fastest one, because of the flat terrain, so the cable does not see much usage.
answered Mar 31 at 7:56
h22h22
31519
answered Mar 31 at 7:56
h22h22
31519
answered Mar 31 at 7:56
h22h22
31519
answered Mar 31 at 7:56
h22h22
31519
31519
Hmm. If the cable is sticking on a brand new bike, it is defective and should be replaced, free of charge. Either the cable is corroded (unlikely on a new bike) or the outers weren't rounded after being cut and they're pinching the inner. (The outers are cut with a cable cutter, which flattens then to an oval profile; you're supposed to poke something round into the cut end to fix that.)
– David Richerby
Mar 31 at 8:50
add a comment |
Hmm. If the cable is sticking on a brand new bike, it is defective and should be replaced, free of charge. Either the cable is corroded (unlikely on a new bike) or the outers weren't rounded after being cut and they're pinching the inner. (The outers are cut with a cable cutter, which flattens then to an oval profile; you're supposed to poke something round into the cut end to fix that.)
– David Richerby
Mar 31 at 8:50
Hmm. If the cable is sticking on a brand new bike, it is defective and should be replaced, free of charge. Either the cable is corroded (unlikely on a new bike) or the outers weren't rounded after being cut and they're pinching the inner. (The outers are cut with a cable cutter, which flattens then to an oval profile; you're supposed to poke something round into the cut end to fix that.)
– David Richerby
Mar 31 at 8:50
Hmm. If the cable is sticking on a brand new bike, it is defective and should be replaced, free of charge. Either the cable is corroded (unlikely on a new bike) or the outers weren't rounded after being cut and they're pinching the inner. (The outers are cut with a cable cutter, which flattens then to an oval profile; you're supposed to poke something round into the cut end to fix that.)
– David Richerby
Mar 31 at 8:50
add a comment |
Take the chain off and thread it through the rear derailleur properly.
It happened to me - there is a small guard near the top cog and the bottom of the rearderailleur, I threaded my chain on the outside of it (easilly done) chain slipped as described.
edited Mar 25 at 22:50
Criggie♦
46.4k578160
answered Mar 25 at 21:51
CreeshaCreesha
1
1
What makes you think this is the problem? If there was a problem with the way the chain has been put through the derailleur, the problem would have existed from day one, not started later.
– David Richerby
Mar 25 at 22:10
add a comment |
Take the chain off and thread it through the rear derailleur properly.
It happened to me - there is a small guard near the top cog and the bottom of the rearderailleur, I threaded my chain on the outside of it (easilly done) chain slipped as described.
edited Mar 25 at 22:50
Criggie♦
46.4k578160
answered Mar 25 at 21:51
CreeshaCreesha
1
1
What makes you think this is the problem? If there was a problem with the way the chain has been put through the derailleur, the problem would have existed from day one, not started later.
– David Richerby
Mar 25 at 22:10
add a comment |
Take the chain off and thread it through the rear derailleur properly.
It happened to me - there is a small guard near the top cog and the bottom of the rearderailleur, I threaded my chain on the outside of it (easilly done) chain slipped as described.
edited Mar 25 at 22:50
Criggie♦
46.4k578160
answered Mar 25 at 21:51
CreeshaCreesha
1
Take the chain off and thread it through the rear derailleur properly.
It happened to me - there is a small guard near the top cog and the bottom of the rearderailleur, I threaded my chain on the outside of it (easilly done) chain slipped as described.
edited Mar 25 at 22:50
Criggie♦
46.4k578160
answered Mar 25 at 21:51
CreeshaCreesha
1
edited Mar 25 at 22:50
Criggie♦
46.4k578160
edited Mar 25 at 22:50
Criggie♦
46.4k578160
edited Mar 25 at 22:50
Criggie♦
46.4k578160
46.4k578160
answered Mar 25 at 21:51
CreeshaCreesha
1
answered Mar 25 at 21:51
CreeshaCreesha
1
answered Mar 25 at 21:51
CreeshaCreesha
1
1
1
What makes you think this is the problem? If there was a problem with the way the chain has been put through the derailleur, the problem would have existed from day one, not started later.
– David Richerby
Mar 25 at 22:10
add a comment |
1
What makes you think this is the problem? If there was a problem with the way the chain has been put through the derailleur, the problem would have existed from day one, not started later.
– David Richerby
Mar 25 at 22:10
1
1
What makes you think this is the problem? If there was a problem with the way the chain has been put through the derailleur, the problem would have existed from day one, not started later.
– David Richerby
Mar 25 at 22:10
What makes you think this is the problem? If there was a problem with the way the chain has been put through the derailleur, the problem would have existed from day one, not started later.
– David Richerby
Mar 25 at 22:10
add a comment |
Thanks for contributing an answer to Bicycles Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f59928%2fcould-the-e-bike-drivetrain-wear-down-till-needing-replacement-after-400-km%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
4
At the end of the day, the answer to "My new bike doesn't work properly" is to take it back to the shop and get them to fix it. A good bike shop should also be offering a free service after, say a month, to make sure everything's adjusted properly. Of course, it's always educational to find out how you'd diagnose and fix it yourself.
– David Richerby
Mar 23 at 20:31
2
An E-Bike should definitely last more than 400km, unless it is a cheap plastic toy for indoor use by children After all, it's a motorcycle, just not with a internal combustion engine but an electric one. This is in contrast to a Pedelec ("Pedal Electric Cycle") where the user is intended to propel the bike with the pedals, with some assistance from an electric motor. A Pedelect is built quite similar to a regular bike - and therefore shares the same weak points. Specifically, the bearings. A failong bottom bracket (to which the crankset ("the pedals") is connected) emits loud clicking noises.
– Klaws
Mar 24 at 15:30
@Klaws Most things that people call "e-bikes" are what you call a "pedelec". But what difference does it make? Any e-bike, pedelec or ordinary bicycle should last more than 400km.
– David Richerby
Mar 25 at 22:08
@David The difference is that a "true e-bike" (like, for example, the Super SOCO TS1200R, motor power 2.4kW) has no "human factor" in the drivetrain. It will not deliver any more drive prower into the mechanical drive parts than it's rated for. A pedelec is different, it has pedals. And it's probably meant for the more lazy riders, who can add maybe 0.1kW of power to the motor power of maybe 0.25kW. A "trained amateur" can easily deliver a longterm 0.2kW (much more shortterm), and a pro can exceed 2kW. An enthusiastic biker can put much more stress on the drivetrain than it was designed for.
– Klaws
Apr 1 at 12:16
@Klaws I'm aware of the differences. My question "What difference does it make?" was specifically about the "My bike broke after 400km" aspect of the question. Whatever type of electric two-wheeled vehicle it is, it should be lasting much longer than that.
– David Richerby
Apr 1 at 12:24